Search
Home > Products > Time & Frequency Instruments > SC10

Ovenized Quartz Oscillator SC10 ... from $350
SC10 10 MHz ovenized oscillator
SC10 Ovenized Crystal Oscillator
  • SC-cut crystal for low phase noise
  • 2 × 10-12 Allan variance (1 s)
  • Low aging (<2 × 10-10/day)
  • +15 or +24 VDC operation
  • Electronic frequency control
The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 × 10-12 and an aging rate of only 2 × 10-10, making it ideal for virtually any precision timing application.
   Related Products

> FS725 Rubidium Standard
> FS730 Distribution Amplifier
> PRS10 Rubidium Oscillator
Downloads

Datasheet
User's Manual
Prices
SC10 Ovenized Crystal Oscillator

The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 × 10-12 and an aging rate of only 2 × 10-10, making it ideal for virtually any precision timing application.

Convenient Options

A number of options can be specified to match the SC10's performance to your requirements. +15 or +24 VDC operation can be specified, and the output is available on SMA, SMB, and SMC connectors, or on a single pin. Aging, noise, temperature stability, and operating temperature range can all be separately specified in one of three grades so you only pay for the performance you need. The electronic fine tuning (EFC) is available with a number of tuning ranges and slopes.

 

 

Phone: (408)744-9040 • Fax: (408)744-9049 • email: info@thinkSRS.comwww.thinkSRS.com

SC10 Ovenized Crystal Oscillator
Grade Dependent Specifications
  J K A
Frequency 10 MHz 10 MHz 10 MHz
Aging (per day) <1 × 10-9 <5 × 10-10 <2 × 10-10
Allan var. (1s) <1 × 10-11 <5 × 10-12 <2 × 10-12
Phase noise (per Hz)
     10 Hz <-120 dBc <-125 dBc <-130 dBc
     100 Hz <-150 dBc <-150 dBc <-150 dBc
     1 kHz <-158 dBc <-158 dBc <-158 dBc
     10 kHz <-158 dBc <-158 dBc <-158 dBc
Temp. range (°C) 0 to 50 -10 to 60 -20 to 70
Temp. stability (0 to 50 °C) <±2 × 10-9 <±1 × 10-9 <±5 × 10-10
Power
     Warm-up 8 W 8 W 12 W
     25 °C 3 W 3 W 3 W
Output
Output level 1 Vrms into 50 Ω (+13 dBm)
Output accuracy ±5 %
Output waveform Sine wave
Harmonic distortion <-60 dBc
Tuning
Mech. tuning range >±3 Hz
EFC range and slope
     Option 1 0 to 10 V, 5 V nominal, +0.5 Hz/V
     Option 2 0 to 10 V, 5 V nominal, -0.5 Hz/V
     Option 3 -10 to 10 V, 0 V nominal, +0.25 Hz/V
     Option 4 -10 to 10 V, 0 V nominal, -0.25 Hz/V
     Option 5 -5 to 5 V, 0 V nominal, +0.5 Hz/V
     Option 6 -5 to 5 V, 0 V nominal, -0.5 Hz/V
     Option 7 0 to 6 V, 3 V nominal, +0.75 Hz/V
     Option 8 0 to 6 V, 3 V nominal, -0.75 Hz/V
General
Output connector Pin, SMA, SMB, or SMC
Supply voltage +15 VDC or +24 VDC
Size 2" × 2" × 4" (WHL)
Weight 1 lbs.
Warranty One year parts and labor on defects in materials and workmanship
 
1. Low power warm-up option is available. Contact factory for details.
2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time.
 
 
 
 
 
 
Phone: (408)744-9040 • Fax: (408)744-9049 • email: info@thinkSRS.comwww.thinkSRS.com