Search
Home > Products > Scientific Instruments > SR445A

Preamplifier SR445A ... from $1200
SR445A Quad 350 MHz preamplifier
(Click to enlarge)
SR445A 350 MHz Preamplifier
  • 4 independent channels
  • DC to 350 MHz bandwidth
  • 1 ns rise/fall time
  • 6.4 nV/√Hz input noise
  • Voltage gain to 625
  • 50 Ω input and output impedance
  • 3 ns overload recovery
The Model SR445A 350 MHz Preamplifier contains four wide-bandwidth, DC-coupled amplifiers, each with a gain of 5. The four channels may be used independently, or cascaded to provide a total gain of up to 625. The fast rise time, low noise, and excellent DC accuracy of the SR445A make it an ideal instrument for amplifying the outputs of fast photomultiplier tubes and photodiodes.
   Related Products

> SR844 200 MHz Lock-In
> SR250 Gated Integrator
> SR400 Photon Counter
> SR430 Multi-Channel Scaler
Downloads

Datasheet
User's Manual
Prices

SR445A 350 MHz Preamplifier

The Model SR445A 350 MHz Preamplifier contains four wide-bandwidth, DC-coupled amplifiers, each with a gain of 5. The four channels may be used independently, or cascaded to provide a total gain of up to 625. The fast rise time, low noise, and excellent DC accuracy of the SR445A make it an ideal instrument for amplifying the outputs of fast photomultiplier tubes and photodiodes. The SR445A can be used to improve the sensitivity of oscilloscopes, photon counters, boxcar averagers, spectrum analyzers, and other high-frequency test equipment.

Each channel has an input and output impedance of 50 Ω. The input impedance of channel 1 can be increased to approximately 500 Ω by a front-panel switch. This can improve the sensitivity of signals from current and charge output devices, such as photomultiplier tubes. Each channel has a separate offset adjustment allowing you to quickly null DC errors.

 

 

Phone: (408)744-9040 • Fax: (408)744-9049 • email: info@thinkSRS.comwww.thinkSRS.com

SR445A 350 MHz Preamplifier
General
Amplifier channels 4
Inputs and outputs 50 Ω (DC coupled)
Bandwidth DC to 350 MHz (-3 dB)
Rise/fall time 1 ns (single channel)
Voltage gain 5 per channel (up to 4 channels can be cascaded)
Input noise 6.4 nV/√Hz
Operating range Inputs: ±200 mV, Outputs: ±1.0 V
Propagation delay 2.7 ns per channel
Recovery time 3 ns for a 10× overload
Input protection ±50 V for <1 ms
Output clamp ±1.6 V
Output overload detect ±1.3 V
Crosstalk -60 dB
Operating temperature 0 °C to 40 °C, non-condensing
Dimensions 8.3" × 1.5" × 8.0" (WHL)
Power 10 W, 100/120/220/240 VAC, 50/60 Hz
Warranty One year parts and labor on defects in materials and workmanship
 
 
 
Phone: (408)744-9040 • Fax: (408)744-9049 • email: info@thinkSRS.comwww.thinkSRS.com