Home > Support > Application Notes
Application Notes

PDF documents require Adobe Acrobat Reader to be installed on your computer. If you do not currently have Acrobat, please click on the button to the right.

Test & Measurement Instruments

  • About FFT Spectrum Analyzers
  • Direct Digital Synthesis - Impact on Function Generator Design
  • DS345 as a Pulse Generator
  • Output Impedance levels for the DS360 Function Generator
    		•
    Scientific Instruments
  • About Lock-In Amplifiers
  • Continuous Transfer on SRS DSP Lock-Ins
  • File Format for the SR850 Lock-In Amplifier
  • Signal Recovery with Photomultiplier Tubes - Photon Counting, Lock-In Detection or Boxcar Averaging?
  • Optical Choppers
  • Signal Enhancement
  • Communications Examples for SIMs
    		•
    Time/Frequency Instruments
  • Making Measurements with the SR620 Time Interval Counter
  • PRS10 Dimensional Drawing
    		•
    Vacuum & Analytical Instruments
  • Vacuum References
  • AVS CEBAF Presentation
  • Conversion Factors for Pressure Units
  • Advantages of the DigiMelt over the MelTemp
  • Quartz Crystal Microbalance References
  • High Temperature Microbalances
  • Quartz Crystal Microbalance Theory

    • Gas Analyzers

  • Vacuum Diagnosis with a Residual Gas Analyzer
  • Choosing a Quadrupole Gas Analyzer
  • High Pressure Sampling with RGAs
  • SRS RGA LabVIEW Development Kit
  • Article Comparing RGA's
  • PPM100 Partial Pressure Monitor with SRS RGAs
  • RGA Operation without a Filament
  • RGA Maximum Insertion Nipple
  • O100RI Replacement Ionizer kit
  • The Closed Ion Source (CIS) Advantage

    • Ion Gauge Controller

  • Manufacturer Cross-Reference for Bayard-Alpert Gauges
  • Using the IGC100 with STABIL-ION® Gauges
  • Using the IGC100 with MICRO-ION® Gauges
  • Using the IGC100's Embedded Web Server (Opt 02)
  • Baking the IGC100
  • IGC100 LabVIEW Development Kit
  • Installation of the O100IG Dual Ionization Gauge Option for IGC100
  • Bayard-Alpert Gauge Calibration Service
  • Bayard-Alpert Ionization Gauges (Theory and Practice)
  • Degassing Bayard-Alpert Gauges
  • Gas Correction Factors for Bayard-Alpert Gauge Readings
  • Select the Best Bayard-Alpert Ionization Gauge for Your Application
  • Bayard-Alpert Gauge Filaments: Tungsten or Thoria?
  • Hot vs. Cold Ionization Gauges: Which One is Best for Me?
  • PG105 - Convection Enhanced Pirani Gauge
  • Gas Correction Curves for PG105 Pirani Gauge Readings
  • PG105 vs. TC Gauge: Which One is Best for Me?

    • Melting Point Apparatus (OptiMelt)

  • Automated MP Determinations
  • Melting Point Determination
  • Melting Point Certified Reference Standards
  • Temperature Calibration Methods
  • Determination of Melting Points According to Pharmacopeia
  • Pharmacopeia vs. Thermodynamic Melting Point Determinations
  • OptiMelt References

    • Quartz Crystal Microbalances