info@thinkSRS.com (408) 744-9040
(408) 744-9040
Home > Products > Scientific Instruments > SR554
Preamplifier
SR554 — Transformer preamplifier
SR554 ... from  $1200
Preamplifier
SR554 — Transformer preamplifier
SR554 ... from  $1200
SR554 ... from  $1200
 
BUY / QUOTE
BUY / QUOTE
  • Transformer-coupled input
  • 0.1 nV/√Hz input noise
  • 0.1 Hz to 40 kHz bandwidth
  • Gain of 100 or 500
  • Single-ended and differential inputs
  • >40 dB isolation (DC to 500 MHz)
  • Powered by SRS lock-ins
  • Transformer-coupled input
  • 0.1 nV/√Hz input noise
  • 0.1 Hz to 40 kHz bandwidth
  • Gain of 100 or 500
  • Single-ended/differential inputs
  • >40 dB isolation
    (DC to 500 MHz)
  • Powered by SRS lock-ins
  • Transformer-coupled input
  • 0.1 nV/√Hz input noise
  • 0.1 Hz to 40 kHz bandwidth
  • Gain of 100 or 500
  • Single-ended and differential inputs
  • >40 dB isolation (DC to 500 MHz)
  • Powered by SRS lock-ins
          X

SR554 Preamplifier

Overview
The SR554 is a low-noise, transformer-coupled preamplifier optimized for source impedances between 0.05 Ω and 1 kΩ. With an input noise of only 0.1 nV/√Hz, the SR554 can be used in a wide range of low-noise applications. It is the ideal preamplifier for low-temperature synchronous detection applications where isolation between the experimental sample and the lock-in amplifier is critical.
          X

SR554 Preamplifier

Front Panel

          X

SR554 Preamplifier

SR554 Transformer Preamplifier

SR554 Transformer Preamplifier

The SR554 is a low-noise, transformer-coupled preamplifier optimized for source impedances between 0.05 Ω and 1 kΩ. With an input noise of only 0.1 nV/√Hz, the SR554 can be used in a wide range of low-noise applications. It is the ideal preamplifier for low-temperature synchronous detection applications where isolation between the experimental sample and the lock-in amplifier is critical.

The SR554 can operate in one of two modes. In the "bypassed" mode, the instrument is simply a passive transformer with a turns ratio of 100, providing an overall voltage gain of 100. In the "non-bypassed" mode, an additional amplifier with a gain of 5 is added increasing the gain to 500 and providing a low-impedance (<1 Ω) output. In the bypassed mode, the SR554 requires no external power. When using the output amplifier, ±20 VDC must be supplied. The preamplifier connector on SRS lock-ins can be used to power the SR554.

Noise Figure Contours

          X

Noise Figure Contours

SR554 Transformer Preamplifier

Amplitude vs. Source Resistance & Frequency

          X

Amplitude vs. Source Resistance & Frequency

SR554 Transformer Preamplifier