info@thinkSRS.com (408) 744-9040
(408) 744-9040
Home > Products > Time & Frequency > FS730/4
Distribution Amplifier
FS730 Series — Broadband 50 Ω distribution amplifiers
FS730 & FS735 ... from  $1450
Distribution Amplifier
Broadband 50 Ω amplifiers
FS730 & FS735 ... from  $1450
FS730 & FS735 ... from  $1450
 
BUY / QUOTE
BUY / QUOTE
  • Input protection
  • Flat frequency response to 100 MHz
  • Large dynamic range
  • Low noise
  • High current compliance
  • Input protection
  • Flat frequency response to 100 MHz
  • Large dynamic range
  • Low noise
  • High current compliance
  • Input protection
  • Flat frequency response to 100 MHz
  • Large dynamic range
  • Low noise
  • High current compliance
          X

FS735 Distribution Amplifiers

Overview
The FS730/4 Series Distribution Amplifiers are used to distribute broadband (DC to 100 MHz) analog signals over 50 Ω coax. Each amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are DC coupled with a 50 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc.
          X

FS735 Distribution Amplifier

Front Panel

          X

FS735 Distribution Amplifier

Rear Panel


          X

FS730 Distribution Amplifier

Front Panel

          X

FS730 Distribution Amplifier

FS730 & FS735 Broadband 50 Ω Distribution Amplifiers

FS730 & FS735 Broadband, 50 Ω Distribution Amps

Additive Phase Noise

          X

Additive Phase Noise

FS730 & FS735

The FS730/4 Series Distribution Amplifiers are used to distribute broadband (DC-100 MHz) analog signals over 50 Ω coax. Each amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are DC coupled with a 50 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc.

Configuration

The FS73x series of products can be configured as half-width, 1U, benchtop instruments (FS730) shown above, or in full-width, 1U, 19" rack-mount enclosures (FS735) shown below.

The FS730/4 model provides 7 output BNC connectors on the front panel, and can be rack mounted with an optional rack mount kit.

Small Signal Response

          X

Small Signal Response

FS730 & FS735

There are four indicator LEDs. The “power” LED indicates that the unit has AC power. The “signal” LED indicates that an input signal greater that 300 mV is present. The “overload” LED indicates that the input signal has exceeded ±2 V.

The FS735/4/4 model provides 14 output BNC connectors on the rear panel, with status indicators on the front panel. Several types of distribution amplifiers are available as listed below. Different types may be combined within the FS735 chassis.




Large Signal Response

          X

Large Signal Response

FS730 & FS735